Re: [ph-networkers] cisco and huawei connectivity

Top Page
Author: ph-networkers Mailing List
Date:  
To: ph-networkers Mailing List
Subject: Re: [ph-networkers] cisco and huawei connectivity
Rex,

your cisco needs to know the route going to your dial-in users. you may also
consider using different subnets for your ip pool.

add the ff static route to your cisco router:
ip route <your ip pool> 192.168.1.2



----- Original Message -----
From: "Rex Cruz" <rex@???>
To: <ph-networkers@???>
Sent: Sunday, February 08, 2004 6:27 AM
Subject: [ph-networkers] cisco and huawei connectivity


> To all fellow tech,
>
>
> I have new huawei router that has been installed in our network that only
> serve as RAS for our business partners to access a some application to our
> network, Our main router is cisco 3620 (192.168.1.1) and our RAS is huawei
> 2511e (192.168.1.2) my problem is that our dial-in user could'nt even ping
> to my cisco router which belong to the network of my huawei router but if

i
> make a console the huawei router could ping all the servers and also their
> nexthop ip. And in the dial-in i could only ping the ethernet.
>
> Need your assistance.
> pls. see below of my config
> thanks
>
>
>
>   Current configuration
>   !
>     version 1.44
>     local-user test service-type ppp password simple test
>     dialer-rule 1 ip permit
>     ip pool 1 192.168.1.100 192.168.1.108
>     firewall enable
>     ip option source-route
>   !
>   interface Ethernet0
>     ip address 192.168.1.2 255.255.255.0
>   !
>   interface Serial0
>     link-protocol ppp
>   !
>   interface Serial1
>     link-protocol ppp
>   !
>   interface Serial2
>     async mode protocol
>     link-protocol ppp
>   !
>   interface Async1
>     baudrate 38400
>     async mode protocol
>     link-protocol ppp
>     dialer enable-circular
>     dialer-group 1
>     dialer circular-group 0
>   !

>
>   !
>    interface Dialer0
>     link-protocol ppp
>     ppp authentication-mode pap
>     ip address unnumbered  Ethernet0
>     remote address pool 1
>     dialer enable-circular
>     dialer-group 1
>   !
>   quit
>   ip route-static 0.0.0.0 0.0.0.0 192.168.1.1 preference 60
>   !

>
> return
>
>
>
>
> here the ios version.
>
>
>
> [Quidway]disp ver
> Huawei Versatile Routing Platform Software
> VRP (tm) software, Version 1.44 Release 0006
> Copyright (c) 1997-2002 HUAWEI TECH CO., LTD.
> Compiled 21:19:58, Jun 12 2003 ,
>
>
> _______________________________________________
> ph-networkers mailing list
> ph-networkers@???
> http://lists.q-linux.com/mailman/listinfo/ph-networkers
>
>



_______________________________________________
ph-networkers mailing list
ph-networkers@???
http://lists.q-linux.com/mailman/listinfo/ph-networkers