[ph-networkers] cisco and huawei connectivity

Top Page
Author: ph-networkers Mailing List
To: ph-networkers
Subject: [ph-networkers] cisco and huawei connectivity
To all fellow tech,

I have new huawei router that has been installed in our network that only
serve as RAS for our business partners to access a some application to our
network, Our main router is cisco 3620 ( and our RAS is huawei
2511e ( my problem is that our dial-in user could'nt even ping
to my cisco router which belong to the network of my huawei router but if i
make a console the huawei router could ping all the servers and also their
nexthop ip. And in the dial-in i could only ping the ethernet.

Need your assistance.
pls. see below of my config

  Current configuration
    version 1.44
    local-user test service-type ppp password simple test
    dialer-rule 1 ip permit
    ip pool 1
    firewall enable
    ip option source-route
  interface Ethernet0
    ip address
  interface Serial0
    link-protocol ppp
  interface Serial1
    link-protocol ppp
  interface Serial2
    async mode protocol
    link-protocol ppp
  interface Async1
    baudrate 38400
    async mode protocol
    link-protocol ppp
    dialer enable-circular
    dialer-group 1
    dialer circular-group 0

   interface Dialer0
    link-protocol ppp
    ppp authentication-mode pap
    ip address unnumbered  Ethernet0
    remote address pool 1
    dialer enable-circular
    dialer-group 1
  ip route-static preference 60


here the ios version.

[Quidway]disp ver
Huawei Versatile Routing Platform Software
VRP (tm) software, Version 1.44 Release 0006
Copyright (c) 1997-2002 HUAWEI TECH CO., LTD.
Compiled 21:19:58, Jun 12 2003 ,

ph-networkers mailing list